CONTROL SURFACE THROWS
We recommend the following control surface
throws. (Throws are measured at the widest part
of the elevators, rudder and ailerons.)
ELEVATOR:
11/16" up, 5/8" down (High Rate)
1/2" up, 7/16" down (Low Rate)
RUDDER:
2-3/8" right, 2-3/8" left (High Rate)
1-3/8" right, 1-3/8" left (Low Rate)
AILERONS:
1/2" up, 1/2" down (High Rate)
3/8" up, 3/8" down (Low Rate)
FLAPS:
At low point of middle flap,
1-3/8" down
NOTE:
If your radio does not have “dual rates,”
then set up the control surfaces to move midway
between the recommended high and low rates.
Länk: http://manuals.hobbico.com/top/topa0101-manual-v3_1.pdf