Som rubriken, vart plockar man ström till gimbal från APM 2.6?

På ardupilots sida om gimbals läser jag först:
"Instead power the servos from an external BEC or from the APM’s rear power rail with the JP1 jumper removed."

på nästa sida om just jp1 och outputs läser man:
"If you are using any servos such as are required with a traditional helicopter or a camera gimbal, you will need to provide an additional dedicated power supply for the servos. The APM is intended to control servos, not power them."

Känns lite dubbeltydigt, men hur har ni andra gjort?
Rätt onödigt att bränna styrenheten, så vad ska man ha för bec?
Länk till gimbal
http://www.aliexpress.com/item/DJI-P...542902846.html