I mitten av april kom en ny firmware till Spektrum DX8. 3.0 versionen är den samma för flygplan och helikopter med nu finns även ett dedikerat segelflyg läge. Inte purfärsk info, skapar ändå en liten heads up här då jag trots min registrerade produkt lyckats missa detta tills nu.
Version 3.00
8 April 2013
Software Features
• Added full function support for sailplanes (Model Type Sailplane)
Sailplane features include:
• 4 Flight Modes- can be assigned to any 2 switches
Launch
Cruise
Speed
Thermal
• Sailplane Types- 4 wing types available
Normal 1 servo aileron- RES and basic sailplanes
2 servo ailerons- Discuss Launch and Slopes Soaring sailplanes
2 ailerons 1 flaps- Sailplanes with one flap servo
2 ailerons 2 flaps- Full Function Competition and Scale sailplanes
• Tail Types- 3 tail types available
Normal
V-Tail A
V-Tail B
• Motor
Supports motor function on throttle stick, push button or programmable switches
including flight mode
• Camber System
Full trailing edge camber can be adjusted in flight via throttle stick or knob. Different
camber values are available in each flight mode (4). Brake/ Crow is available per flight
mode.
• Camber Preset
4 camber presets available (1 for each flight mode) for flaps, ailerons and elevator
• Flap to Elevator Curve mix
A flap to elevator curve mix can be assigned to a flight mode or switch. Four curves are
available.
• Aileron to Flap Mix
Aileron to Flap mix allows up to four mix values that can be selected via flight modes or
switches
• Aileron to Rudder Mix
• Aileron to Rudder mix allows up to four mix values that can be selected via flight modes
or switches
• Elevator to Flap Mix
Includes offset for snap flap mixing. Four mix values are available
• Six Free Programmable Mixes
• Four Aileron Differential Settings
Selectable in each flight mode or via a programmable switch
• Four Flap Differential Settings
selectable in each flight mode or via a programmable switch
• Elevator Trim Per Flight Mode
Allows active independent elevator trimming per flight mode
Software Corrections
• No changes to Airplane or Helicopter modes
Källa: http://www.spektrumrc.com
Version 3.00
8 April 2013
Software Features
• Added full function support for sailplanes (Model Type Sailplane)
Sailplane features include:
• 4 Flight Modes- can be assigned to any 2 switches
Launch
Cruise
Speed
Thermal
• Sailplane Types- 4 wing types available
Normal 1 servo aileron- RES and basic sailplanes
2 servo ailerons- Discuss Launch and Slopes Soaring sailplanes
2 ailerons 1 flaps- Sailplanes with one flap servo
2 ailerons 2 flaps- Full Function Competition and Scale sailplanes
• Tail Types- 3 tail types available
Normal
V-Tail A
V-Tail B
• Motor
Supports motor function on throttle stick, push button or programmable switches
including flight mode
• Camber System
Full trailing edge camber can be adjusted in flight via throttle stick or knob. Different
camber values are available in each flight mode (4). Brake/ Crow is available per flight
mode.
• Camber Preset
4 camber presets available (1 for each flight mode) for flaps, ailerons and elevator
• Flap to Elevator Curve mix
A flap to elevator curve mix can be assigned to a flight mode or switch. Four curves are
available.
• Aileron to Flap Mix
Aileron to Flap mix allows up to four mix values that can be selected via flight modes or
switches
• Aileron to Rudder Mix
• Aileron to Rudder mix allows up to four mix values that can be selected via flight modes
or switches
• Elevator to Flap Mix
Includes offset for snap flap mixing. Four mix values are available
• Six Free Programmable Mixes
• Four Aileron Differential Settings
Selectable in each flight mode or via a programmable switch
• Four Flap Differential Settings
selectable in each flight mode or via a programmable switch
• Elevator Trim Per Flight Mode
Allows active independent elevator trimming per flight mode
Software Corrections
• No changes to Airplane or Helicopter modes
Källa: http://www.spektrumrc.com